The DeLuxe M19 Stitcher Machine is a single-head stitcher designed to accommodate both light and heavy-duty work, stitch both flat and saddle and is recognized for being the perfect stitcher for the smaller bindery due in part to its 3/4” (20mm) capacity and range of crown sizes. The M19 is the perfect stitcher for thick work; including business forms, ticket booklets and special applications. This stitcher can accommodate eight different wire sizes without the change of parts.
The M19 accommodates the side-feed style G20 stitcher head. The recommended wire sizes for the M19 are: 20 to 28 gauge round wire and 19 x 21-1/2, 20 x 24 and 21 x 25 flat wire.
Deluxe Stitcher M19-AST Wire Stitcher with G20 Head 1/2Hp 115V
The M19 is easily adjusted from saddle work to flat work by tilting the 5-1/2" x 26" work table. An adjustable work guide and adjustable work stops are easily attached to the work table and provide for accurate registering of flat work for uniformly spacing the stitches. In addition a work table extension is provided to accommodate larger format work.
The M19 is foot-switch operated and belt driven by a 1/2 HP motor, making possible cycle speeds up to 200 stitches per minute. The motor is mounted on an adjustable bracket which can be raised or lowered to adjust driving belt tension. The driving mechanism is thoroughly shielded, preventing the possibility of personal injury.
The M19 has a 14" throat depth for either flat or saddle stitching. The work table is approximately 35" above the floor and there is approximately 1" clearance between the top of the work to be stitched and the protective guarding around the stitcher head. Because of the length of the work table, the M19 must be secured to the floor to meet CE stability requirements.
- Capacity: From 2 sheets to 3/4" with a G20 Head
- Wire Sizes: 20-28 round and 19 x 21-1/2, 20 x 24 and 21 x 25 flat
- Clinch: moveable clincher for flat stitching
- Table: 26" wide heavy duty, 14" throat for flat and saddle work
- Speed: 190 stitches per minute