Branson LPT Low Power Ultrasonic System 100-132-931 with a tw1 Converter 150W

Product Description

• Model: LPt 20:0.15
• EDP No: 100-132-931
• Input Voltage: 120Vac
• Max Power: 150W
• MFG Date: 2005
• Converter Model: tw1

The LPt family of low power systems are Branson’s offering for applications with power requirements of 150 Watts or less. The LPt utilizes Branson’s proprietary circuitry with closed loop amplitude control to provide maximum process control.

The LPt units can be used with their appropriate hand-held devices or can be connected directly to a converter/booster/horn stack for use in automation. Two control levels are available: the LPt model provides continu-ous and time welding modes; the LPe model provides continuous, time, and energy welding modes. Both models are available with an optional factory-installed ground detect. Three frequencies are available: 20 kHz at 150 and 500 Watts; 30 kHz at 500 Watts, and 40 kHz at 150 and 500 Watts.

• Digital parameter entry - or precise, easy setup.
• 1 ms sampling rate - of all data provides superior performance.
• Digital amplitude control - allows fine tuning for critical applications (ranges from 10% to 100% in 1% increments).
• Optional ground detect - can be used to detect horn-to-anvil contact or can be utilized as an ‘ultrasonic cut-off’ signal/safety override in all available welding modes. (This option must be factory installed.)
• Audible “end of cycle” tone - to alert the operator that the cycle has finished when using a hand-held device.
• Self-diagnostics and monitoring - provide visual, audible, and logic output alarms.
• Selectable auto reset conditions - for all alarms.