Shawbox LiftTech 10 Ton / 3 Ton Bridge Crane Hoist Assembly

1993 Shawbox LiftTech Combination 10 Ton / 3 Ton Bridge Crane Hoist Assembly Top Riding with 45' Long Cables.  Load Brake has been repaired or replaced within the last few months. 3 Ton Model: 311966-24 3 Ton Serial Number: K2-75616 3 Ton...

Associated Research Hypot Plus II 5560DT AC/DC Withstand Voltage Tester

Associated Research Hypot Plus II 5560DT AC/DC Withstand Voltage Tester The Associated Research 5560DT HypotPLUS®II includes full microprocessor control to enhance ease of use and operator safety. This instrument provides you with all the...

Hytrol Powered Roller Conveyor 63" Wide x 12'-6" Long 1Hp Reliance Motor

Hytrol Powered Roller Conveyor 63" Inches Wide Between Rails 12' Foot 6" Inches Long.  Comes with (6) 10" Tall Legs.  We also have another 63" Wide Powered Roller Conveyor In Stock with 24" Adjustable Height Legs in our Store. Type: Powered...

Weigh-Tronix 3275 Checkweigher 6Kg Capacity Stainless Steel Digital Scale

Weigh-Tronix 3275 Checkweigher / Digital Scales, Stainless Steel Construction, 6Kg Capacity, Model: BS-9X9-12LB, Waterproof Rugged Design, with "Go", "NoGO" Scale Display for Fast Product Checking.  All Checkweighers have been tested and are in good...

Stelron BT-50A-NR-LK-9.00X-2.00Y-3 Translator X & Y Walking Beam Pick & Place

Stelron X-Y Translator Pick and Place Walking Beam Indexer.  This unit is in good working condition and comes with the Danfoss 3/4 Hp DC Motor TEFC.  Model: BT-50A-NR-LK-9.00X-2.00Y-3 3/16 Type: X-Y Translator X Axis Stroke: 9.00" Inch...

ATek TruAmp III Welding Control Monitor MC-010A Control Board Spot Welder

ATek TruAmp III Resistance Welding Control Monitor with Smart Touch Current Trigger and MC-010A Control Board.  Holds up to 3 schedules.  Excellent Condition with 30 Day Warranty.Features +/- 1% control of amperage Corrects for resistance...

Logomat Powered Roller Conveyor 20" Wide x 150' Linear Feet Sew Eurodrive Motor

Logomat Automation Systems Powered Roller Conveyor, Chain Driven with Sew Eurodrive Gear Motor Assemblies, Extruded Aluminum Frames, and Heavy Duty Rollers.  We have the specifications listed below.  There are several transfer systems built...

Telesis Pinstamp TMM5100 Marker with TCM400 /5100 Controller

Orii Corporation Servo Straightener Feeder With Dual Coil Feeder 1500Kgf

1994 Orii Corporation Servo Feeder Straightener with Dual Coil Feeder 1500Kgf x 2 Capacity.  This system will be removed from service on December 7, 2018.  It is in good running condition.  See Video.  Spec. Sheet PDF is available...

Aida Coil Feeder Servo Straightener Line 2600 Lb Capacity LFL-300E

Aida Engineering LTD Steel Coil Feeder with Servo Driven Straightener Model LFL-300E.  This Feeder/Straightener System will be removed from service on December 7, 2018.  We have listed all the specifications below. Model: LFL-300E Serial...

Motoman Motopos-T5000B Welding Turntable Positioner 5000Kg Payload 1 Axis

2007 Yaskawa Motoman Motopos Robotic Welding Turntable/Positioner.  This welding positioner has a 5000Kg Payload Capacity with 270 Degrees of Rotation.  You will achieve both high precision control and speed with the servo drivetrain. ...

Extol CI301 InfraTol with InfraStake Infrared Plastic Welder 120Vac

Extol CI301 InfraTol Controller with (1) InfraStake Infrared Plastic Welding Head.  The Extol InfraTol Controller is capable of running up to 3 infrared welding heads at one time.  It is designed to fit inside a standard 19" rack mount...

CTM 3600-PA Label Applicator with Tamper 10' Conveyor Sato M-8490Se Printer

CTM Automatic Labeling System Equipped with 6.5" x 10" Conveyor, Product Spacing Wheel, Adjustable Height "Hold Down" Conveyor to hold product in place while label is applied, Microscan 860 Barcode Scanner, CTM 3600-PA Label Printer Applicator Unit with...

Marathon V-4224-02 Vertical Cardboard Baler 1.5Hp 120-230Vac 42" Wide Bale

Marathon V-4224-02 Vertical Cardboard Baler 1.5Hp Hydraulic Pump Produces 42" Wide x 24" Deep x 28" Tall Bales.  Very Good Condition, Tested with 30 Day Warranty. Model: V-4224-02 Serial Number: 9147634 Voltage: 120/230Vac Single Phase Horsepower:...

Hytrol Powered Roller Conveyor 33" W x 50' L Heavy Duty Rollers Drive Chain

Hytrol Heavy Duty Chain Driven Powered Roller Conveyor with UHMW Black Roller Covers to protect your products, reduce noise, and friction.  Each lot comes with (5) 10' Long x 33 1/2" Wide Sections (We have all measurements and specs. listed below),...

ITW Dynatec Dynamini Hot Melt Glue Machine Lot of 2

Lot of 2 2012 ITW Dynatec Dynamini Hot Melt Glue Machines 220-240Vac Single Phase 30 Amp.  Both machines power up, but both have bad tank manifold seals and glue is leaking out the bottom.  We didn't put these through a full test due to the bad...

Nadesco Nadex PH3-37006-A1-S Welding Controller 400A with PH3-W6112-A1-S

2004 Nadesco Nadex PH3 Series Spot Welding Controller Assembly. Assembly Model: PH3-W6112-A1-S Welding Control Model: PH3-37006-A1-S Rated Load Current: 400A Line Voltage: 460Vac 3 Phase  Duty Cycle: 10% MFG Date: 2004

Dengensha 135 Kva Welding Transformer WT3-D5-ND Spot Welder 480V RoMan

2005 Dengensha 135Kva Welding Transformer for Spot Welding & Resistance Welding Applications.  Used Item in excellent condition, 30 Day Warranty. Model: WT3-D5-ND Primary Voltage: 480Vac  Primary Frequency: 60Hz Capacity (50% Duty Cycle):...

Obara Corp. Welding Gun SEN-4357 L Spot Welder 4.5" Throat 4" Opening

2002 Obara Corp. SEN-4357 Fixture Mounted Spot Welding Gun Assembly.  This assembly is water cooled and is equipped with Obara 7A & F7193 Jaws and Obara 0E-ADN-54-152-L-C Pnuematic Actuator Piston.   Throat Depth: 4 1/2" Deep Jaw...

Rimage Prism III Thermal Transfer Printer for CD/DVD/ & Blueray CDPR6

Rimage Prism III CD/DVD/ & Blueray Thermal Transfer Printer Model CDPR6.  "Used" with 30 Day Warranty.Rimage's Prism III exclusive thermal transfer technology is designed specifically for your CD and DVD printing with black or spot color at...

Shanklin T-72 Heat Shrink Tunnel 230Vac 3 Ph 64 Amp 22" x 8.5" Capacity

Shanklin T-72 Heat Shrink Tunnel 220Vac 3 Phase. Machine has adjustable conveyor speeds from 25 to 150 feet/minute, has an adjustable aperture height of 4" to 8.5" and an overall width of 22". Total Conveyor Length is 132" long. This Heat...

Power Flame CR5-G-30B Boiler Burner 167Hp Natural Gas

2007 Power Flame 167Hp Boiler Burner Assembly Model CR5-G-30B.  Was removed in good working condition from a2007 Cleaver Brooks FLX-700-900-150 Water Tube Steam Boiler.  We had to remove the Honeywell Burner Control for another customer but...

20 Ton Air Cooled Chiller with Shell & Tube Heat Exchanger Gould's Pumps

Hydr-O-Thrift 20 Ton Air Cooled Chiller with Thermal Transfer Products 4-Pass Shell & Tube Heat Exchanger, Hydr-O-Thrift Air Cooled Condenser with 3 Fans, and Dual Gould's Pumps 1ST1F9C4 Stainless Steel Pumps 1.5Hp each.  This system was...

Ingersoll Rand IRGP481 Compressed Air Filter 1 1/2" In/Out 42515874

Ingersoll Rand IRGP481 Compressed Air Particulate Filter Housing with Element 42515874.  Unit includes filter life indicator on front and back of housing.  Inlet and Outlet Ports are 1 1/2" NPT.