Product Description
2018 Gorman-Rupp Super T Series Self Priming Centrifugal Pump T3A65S-B. The pump is clean inside and out, and the shaft spins freely.| T3A65S-B Specifications | |
|---|---|
| Suction | 3" (80 mm) |
| Discharge | 3" (80 mm) |
| Solids Handling | 2.50" (64 mm) |
| Casing | CD4MCu |
| Impeller/Rotor | CD4MCu |
| Seal Material | Silicon Carbide |
| Flange | NPT |
| Drive Type | Basic |
| Unit Weight | 492 lb |
The Gorman-Rupp T3A65S-B is a 3-inch self-priming centrifugal pump from the Super T Series, designed for handling solids-laden liquids, mild corrosives, slurries, and trash. It features a silicon carbide seal and is optimized for higher-head applications (B variant). Performance varies based on head, impeller trim, suction lift, liquid properties (e.g., viscosity, specific gravity), and operating speed, but it's tested on clear water at 70°F (21°C), sea level, with minimum suction lift.From product specifications and distributor data, the maximum discharge capacity is 448 gallons per minute (GPM), achieved at low head (typically near 0 ft total dynamic head, or TDH). This represents the peak flow rate on the standard performance curve.Key Specifications
|
Parameter
|
Value
|
|---|---|
|
Max Capacity
|
448 GPM (2,830 L/min)
|
|
Max Head
|
112 ft (34 m)
|
|
Solids Handling
|
Up to 2 in (51 mm) spherical solids
|
|
Impeller Type
|
Semi-open, enclosed (cast iron or stainless steel options)
|
|
Max Liquid Temp
|
160°F (71°C)
|
|
Suction/Discharge
|
3 in (80 mm) NPT
|
|
Max Operating Pressure
|
~75 psi (5 bar)
|
Product Videos
Custom Field
GTIN Does Not Apply
Country/Region of Manufacture United States
Power Source Electric
Manufacturer Gorman-Rupp
Flow Rate 448 GPM
Series Super T Series
Model T3A65S-B
MPN T3A65S-B
Type Self Priming Centrifugal Pump
