Product Description
Nigata 55 Ton Vertical Rotary Injection Mold Machine Equipped with a 2 Station Turntable, Yushin HOP III M 550X Sprue Picker, Yushin HOP Series Teach Pendant, Owners Manual, & 6" Tall Foot Blocks to Increase the Working Height. This system is clean and has been well maintained.Machine Specifications:
- Model: NVR55
- Serial: 80244 R
- MFG Dte: 11-98
- Voltage: 480Vac 3 Phase
- Screw Diameter: 1.38 in.
- Plasticizing Capacity: 0.50 oz/sec
- Calculated Injection Capacity: 5.86 in.3
- Shot Mass: 3.03 Oz.
- Max. Injection Pressure: 21,190 PSI
- Injection Rate: 7.93 in3/sec
- Screw Stroke: 3.94 in.
- Nozzle Stroke: 7.87 in.
- Max Screw Speed: 300 RPM
- Number of Temp Control Zones: 4 Zones
- Clamping System: Upper Mold Moving Direct Clamp
- Clamping Force: 55 Ton
- Mold Opening Stroke: 9.84 in.
- Min. Mold Height: 7.87 in.
- Open Daylight: 17.72 in.
- Ejector Stroke: 2.38 in.
- Ejector Force: 3.08 Ton
- Pump Motor Capacity: 11 Kw
- Heating Capacity: 4.54 Kw
- Table Diameter: 41.73 in.
- Degrees of Rotation: 180 Degrees
- Max. Mold Size: 12.99 in. x 12.99 in.
- Max. Mold Mounting Number: 1 Upper Mold, 2 Lower Molds
- Table Drive: Hydraulic Motor
- Machine Mass: 4.40 Ton
- Machine Size: 88.58 in. x 53.15 in. x 124.80 in.
- Oil Tank Capacity: 44.91 Gal
- Hopper Capacity: 3.96 gal
- Cooling Water Consumption: 7.93 gal/min
Note: Shot mass cited above is for polystyrene and is 89% of the theoretical shot volume.
Product Videos
Custom Field
Type Vertical Injection Mold Machine
Voltage 480Vac 3 Phase
MPN NVR55
Model NVR55
Manufacturer Nigata
Country/Region of Manufacture Japan
