Product Description
The Bürkert Type 2000 (Article No. 000014212) is a pneumatically operated 2/2-way angle seat valve featuring a cast stainless steel 316L body rated to PN25. Designed for on/off shut-off service, it handles a wide range of media including water, steam, alcohol, oils, hydraulic fluids, alkali solutions, and organic solvents up to +185°C. The externally piloted piston actuator, available in PA or PPS, drives the valve via a self-adjusting PTFE packing gland that ensures long-term sealing integrity and a maintenance-free service life. This is a used Bürkert Type 2000 pneumatic angle-seat valve, removed from working equipment. Complete assembly with pneumatic actuator and DN13 stainless steel 316L valve body. Valve is in good used condition with normal cosmetic wear. Operational prior to removal; not independently tested since removal.
Technical Specifications
| Specification | Value |
|---|---|
| Brand | BURKERT |
| Model/Part Number | Bürkert 000014212 DN13 PN25 Stainless Steel 316L |
| Valve Type (Series) | Type 2000 — Pneumatically Operated 2/2-Way Angle Seat Valve (CLASSIC) |
| Valve Function | 2/2-way, On/Off (Shut-off) |
| Operation | Pneumatic |
| Valve Ways & Position | 2/2-Way |
| Orifice / Nominal Diameter | DN13 (1/2 inch) |
| Nominal Pressure Rating | PN25 (DIN EN 1333), Class 150 (DIN EN 1759) |
| Operating Pressure Range | 0 – 25 bar(g); vacuum option to -0.9 bar(g) |
| Pilot Pressure | 2 – 10 bar(g) |
| Body Material | Cast Stainless Steel 316L (CF3M / 1.4408) |
| Seal / Seat Material | PTFE (NBR, FKM, EPDM, PEEK available on request) |
| Packing Gland | PTFE V-rings with spring compensation (self-adjusting) |
| Swivel Plate Material | Stainless Steel 1.4401 |
| Actuator Material | PA or PPS (depending on ambient temperature) |
| Media Temperature | -10°C to +185°C (with PTFE seal) |
| Compatible Media | Water, alcohol, oils, fuel, hydraulic fluids, salt solutions, alkali solutions, organic solvents, steam |
| Viscosity (Max) | 600 mm²/s |
| Seat Leakage | Leakage Rate A (DIN EN 12266-1); PTFE/PEEK seat seal, test medium air |
| Flow Direction | Below seat (standard for liquids, steam, and gases) |
| Control Function | See unit label (CF A = Normally Closed or CF B = Normally Open) |
| Port Connection | See unit label (G-thread, NPT, weld end, or clamp variants available) |
| Standards / Approvals | CE; Pressure Equipment Directive; conforms to DIN EN 1333, DIN EN 1759 |
| Manufacturer | Bürkert Fluid Control Systems |
We warranty all items for 30 days from date of purchase.